After the use of magnesium carbonate and light burned 30%-70%, it has little change in strength and elongation, heat generation, aging and so on, which is much better than common magnesium carbonate.
In terms of wear reduction and reduction, it is superior to magnesium carbonate without reduction, which is far superior to ordinary magnesium carbonate without reduction. In terms of density, the density of magnesium carbonate decreases obviously after reduction, which is of great help to reduce cost and lighten the overall weight and improve the performance of products. Therefore, in the use of magnesium carbonate, it is recommended that the amount of consumption should be reduced to about 30%-70% of common magnesium carbonate. This reduction is not only a cost requirement, but also a performance requirement. Magnesium carbonate has certain requirements when in use, only for use according to the requirements before they can make magnesium carbonate play a great effect, let the manufacturer to introduce magnesium carbonate what is required to use a magnesium carbonate. First, we need to pay attention to the temperature conditions of use, when in use, if the temperature is too high so, it is easy to produce will lead to melting. The second is the attention to the problem of moisture, magnesium carbonate can be dissolved in water, if the air around the water is too high, it will still be melted. There is a note when using the number of different applications, is not the same for the number of the requirements, we must ratio according to requirements. Magnesium carbonate is a chemical substance, in addition to the above requirements, the occasion is a need to pay special attention to the not On the same occasion, the requirements for the brick board are certainly different. Only after the use of the requirements can they play a larger effect.